IVAR

All Products

Radiant systems

2-way axial valves for high flow capacity

PRODUCTS

Find what you need among more than 11.000 products.

03

2-way axial valves for high flow capacity

Thermostatically controllable valves are used to cut off and adjust flow through heating bodies. They can be equipped with thermostatic or manual head, or with motorised actuators such as electrothermal head and axial servomotor.

Series VDS valves are particularly suitable to systems with flow rates. VDS valves are supplied with a cap, that protects the thread from damages and allows the complete closure of the valve during system start-up.

The thermostatic insert can be inspected and, if necessary, the spindle o-ring can be replaced even while the system is working. VDS device can be mounted either as a straight or an angle valve according to requirements, simply by screwing the plug (also supplied) into the unused inlet.

In the motorised version, VDS 02, the obturator is machined so to provide a better adjustment, and the headwork has been designed to allow the direct installation of the servomotor on the valve: this ensures a 1-mm extra-stroke from closure position and a higher tolerance on the motor stroke.

Image of VDS 01

Angle/straight thermostatic valve for high flow capacity

Image of T 5011

Thermostatic head with incorporated command and remote immersion sensor.

Image of T 5012

Thermostatic head with incorporated command and remote contact sensor

Image of AGE 13

Thermometer well for T 5011 and T 5011 U thermostatic heads.

Image of VDS 02

Angle/straight motorized valve for high flow capacity.

Image of RV 01

Axial motor. Suitable for all IVAR thermostatic inserts.

Image of TE 3061

Electrothermal head normally closed (proportional control 0-10 V). Suitable for all IVAR thermostatic inserts.

HEAT PUMP KIT - Pump unit for heat pumps systems

FLOORMIX - System for radiant heating

COMBIMIX - Mixing and pump unit for radiant systems

TECHNOMIX - Mixing and pump unit for radiant systems

MULTIFLOOR - Mixing and pump unit for radiant systems

UNIMIX - Mixing and pump unit for radiant systems

UNIMIX•C - Mixing and pump unit for radiant systems

Accessories for mixing and pump units UNIMIX - UNIMIX•C

UNIFLOOR - Mixing and distribution unit for single radiant circuit

Pumps

IC•BOX - Non-mixed compact radiant system

Panels for radiant floor systems

Radiant ceiling/wall systems

Accessories for radiant floor systems

Accessories for radiant ceiling/wall systems

Dehumidifiers

NEW PRODUCTS

View CATALOGUE

IVAR-ESAT DUAL A0

Image of IVAR-ESAT DUAL A0

Heating interface unit with separated heat exchangers for heating and domestic hot water preparation, variable...

Image of HEAT PUMP KIT

Pump connection unit with swivel fitting, with/without 130 mm variable speed electronic pump. Suitable for systems...

Modular manifolds EASY•LOCK

Image of Modular manifolds EASY•LOCK

The EASY•LOCK series manifolds are characterised by their ability to be connected to each other in an easy and...

Stainless steel manifolds

Image of Stainless steel manifolds

Outlets misalignment: when you rotate 180° one of the two manifolds, you get the outputs misaligned. This feature...

WE RESPECT THE ENVIRONMENT WITH SIMPLE ACTIONS

Thanks to this screen, your monitor consumes less energy when the computer is inactive.

To restart navigation, simply click with the mouse.