PRODUCTEN

Find what you need among more than 11.000 products.
01

HEAT PUMP KIT - Pump unit for heat pumps systems

Heat Pump Kit is a booster system to be used in combination with heat pumps, or more generally where control of the flow temperature is not required. The system has fittings for connection of the circulation pump, and the flow temperature to the terminal devices is managed directly upline, typically by the heat pump itself.

Heat Pump Kit features an inlet fitting with four connections, two of which are on a swivelling body

The system stands out for its ease of installation thanks to this feature, as the fitting can be oriented in different ways.

Heat Pump Kit can therefore be installed to the left or right of the distribution manifold, making up the offset between the flow and return manifold, and with connections to the primary circuit at the side or bottom.

The kit can be used in combination with manifolds with 200 mm centre distance if a pump with 130 mm centre distance is used, or coupled with manifolds with 250 mm centre distance if a pump with 180 mm centre distance is used.

The kit is supplied with or without booster pump

Moreover, by setting the circulation pump in constant Δp mode, the system already offers dynamic balancing at the ends of the distribution manifold without the need to install further dynamic balancing components on the manifolds.

Ontdek

WE RESPECT THE ENVIRONMENT WITH SIMPLE ACTIONS

Thanks to this screen, your monitor consumes less energy when the computer is inactive.

To restart navigation, simply click with the mouse.